RCW 58.09.050 Records of survey—Processing—Requirements.

The records of survey to be filed under authority of this chapter shall be processed as follows:

(1)(a) The record of survey filed under RCW 58.09.040(1) shall be an original map, eighteen by twenty-four inches, that is legibly drawn in black ink on mylar and is suitable for producing legible prints through scanning, microfilming, or other standard copying procedures.

(b) The following are allowable formats for the original that may be used in lieu of the format set forth under (a) of this subsection:

(i) Photo mylar with original signatures;

(ii) Any standard material as long as the format is compatible with the auditor's recording process and records storage system. This format is only allowed in those counties that are excepted from permanently storing the original document as required in RCW 58.09.110(5);

(iii) An electronic version of the original if the county has the capability to accept a digital signature issued by a certification authority under the rules adopted by the Washington state board of registration for professional engineers and land surveyors, and can import electronic files into an imaging system. The electronic version shall be a standard raster file format acceptable to the county.

A two inch margin on the left edge and a one-half inch margin on other edges of the map shall be provided. The auditor shall reject for recording any maps not suitable for producing legible prints through scanning, microfilming, or other standard copying procedures.

(2) Information required by RCW 58.09.040(2) shall be filed on a standard form eight and one-half inches by fourteen inches as designed and prescribed by the department of natural resources. The auditor shall reject for recording any records of corner information not suitable for producing legible prints through scanning, microfilming, or other standard copying procedures. An electronic version of the standard form may be filed if the county has the capability to accept a digital signature issued by a certification authority under the rules adopted by the Washington state board of registration for professional engineers and land surveyors, and can import electronic files into an imaging system. The electronic version shall be a standard raster file format acceptable to the county.

(3) Two legible prints of each record of survey as required under the provisions of this chapter shall be furnished to the county auditor in the county in which the survey is to be recorded. The auditor, in those counties using imaging systems, may require only the original, and fewer prints, as needed, to meet the requirements of their duties. If any of the prints submitted are not suitable for scanning or microfilming the auditor shall not record the original.

(4) Legibility requirements are set forth in the recorder's checklist under RCW 58.09.110.

[ 2019 c 132 § 6; 1999 c 39 § 1; 1973 c 50 § 5.]