LegalFix

Section 1633 - Mudguards or flaps at rear wheels of trucks, trailers, truck tractors, or altered motor vehicles -- Exemptions.

UT Code § 41-6a-1633 (2019) (N/A)
Copy with citation
Copy as parenthetical citation

(1) (a) Except as provided in Subsection (2), when operated on a highway, the following vehicles shall be equipped with wheel covers, mudguards, flaps, or splash aprons behind the rearmost wheels to prevent, as far as practicable, the wheels from throwing dirt, water, or other materials on other vehicles: (i) a vehicle that has been altered: (A) from the original manufacturer's frame height; or (B) in any other manner so that the motor vehicle's wheels may throw dirt, water, or other materials on other vehicles; (ii) any truck with a gross vehicle weight rating of 10,500 pounds or more; (iii) any truck tractor; and (iv) any trailer or semitrailer with an unladen weight of 750 pounds or more. (b) The wheel covers, mudguards, flaps, or splash aprons shall: (i) be at least as wide as the tires they are protecting; (ii) be directly in line with the tires; and (iii) have a ground clearance of not more than 50% of the diameter of a rear-axle wheel, under any conditions of loading of the motor vehicle.

(a) Except as provided in Subsection (2), when operated on a highway, the following vehicles shall be equipped with wheel covers, mudguards, flaps, or splash aprons behind the rearmost wheels to prevent, as far as practicable, the wheels from throwing dirt, water, or other materials on other vehicles: (i) a vehicle that has been altered: (A) from the original manufacturer's frame height; or (B) in any other manner so that the motor vehicle's wheels may throw dirt, water, or other materials on other vehicles; (ii) any truck with a gross vehicle weight rating of 10,500 pounds or more; (iii) any truck tractor; and (iv) any trailer or semitrailer with an unladen weight of 750 pounds or more.

(i) a vehicle that has been altered: (A) from the original manufacturer's frame height; or (B) in any other manner so that the motor vehicle's wheels may throw dirt, water, or other materials on other vehicles;

(A) from the original manufacturer's frame height; or

(B) in any other manner so that the motor vehicle's wheels may throw dirt, water, or other materials on other vehicles;

(ii) any truck with a gross vehicle weight rating of 10,500 pounds or more;

(iii) any truck tractor; and

(iv) any trailer or semitrailer with an unladen weight of 750 pounds or more.

(b) The wheel covers, mudguards, flaps, or splash aprons shall: (i) be at least as wide as the tires they are protecting; (ii) be directly in line with the tires; and (iii) have a ground clearance of not more than 50% of the diameter of a rear-axle wheel, under any conditions of loading of the motor vehicle.

(i) be at least as wide as the tires they are protecting;

(ii) be directly in line with the tires; and

(iii) have a ground clearance of not more than 50% of the diameter of a rear-axle wheel, under any conditions of loading of the motor vehicle.

(2) Wheel covers, mudguards, flaps, or splash aprons are not required: (a) if the motor vehicle, trailer, or semitrailer is designed and constructed so that the requirements of Subsection (1) are accomplished by means of fenders, body construction, or other means of enclosure; (b) on a vehicle operated or driven during fair weather on well-maintained, hard-surfaced roads if the motor vehicle: (i) was made in America prior to 1935; (ii) is registered as a vintage vehicle; or (iii) is a custom vehicle as defined under Section 41-6a-1507; or (c) on a street-legal all-terrain vehicle.

(a) if the motor vehicle, trailer, or semitrailer is designed and constructed so that the requirements of Subsection (1) are accomplished by means of fenders, body construction, or other means of enclosure;

(b) on a vehicle operated or driven during fair weather on well-maintained, hard-surfaced roads if the motor vehicle: (i) was made in America prior to 1935; (ii) is registered as a vintage vehicle; or (iii) is a custom vehicle as defined under Section 41-6a-1507; or

(i) was made in America prior to 1935;

(ii) is registered as a vintage vehicle; or

(iii) is a custom vehicle as defined under Section 41-6a-1507; or

(c) on a street-legal all-terrain vehicle.

(3) Except as provided in Subsection (2)(b), rear wheels not covered at the top by fenders, bodies, or other parts of the vehicle shall be covered at the top by protective means extending rearward at least to the center line of the rearmost axle.

(4) A violation of this section is an infraction.

LegalFix

Copyright ©2024 LegalFix. All rights reserved. LegalFix is not a law firm, is not licensed to practice law, and does not provide legal advice, services, or representation. The information on this website is an overview of the legal plans you can purchase—or that may be provided by your employer as an employee benefit or by your credit union or other membership group as a membership benefit.

LegalFix provides its members with easy access to affordable legal services through a network of independent law firms. LegalFix, its corporate entity, and its officers, directors, employees, agents, and contractors do not provide legal advice, services, or representation—directly or indirectly.

The articles and information on the site are not legal advice and should not be relied upon—they are for information purposes only. You should become a LegalFix member to get legal services from one of our network law firms.

You should not disclose confidential or potentially incriminating information to LegalFix—you should only communicate such information to your network law firm.

The benefits and legal services described in the LegalFix legal plans are not always available in all states or with all plans. See the legal plan Benefit Overview and the more comprehensive legal plan contract during checkout for coverage details in your state.

Use of this website, the purchase of legal plans, and access to the LegalFix networks of law firms are subject to the LegalFix Terms of Service and Privacy Policy.

We have updated our Terms of Service, Privacy Policy, and Disclosures. By continuing to browse this site, you agree to our Terms of Service, Privacy Policy, and Disclosures.