LegalFix

Section 25-1141 - REQUIREMENTS FOR BRANDING IRONS.

ID Code § 25-1141 (2019) (N/A)
Copy with citation
Copy as parenthetical citation

25-1141. REQUIREMENTS FOR BRANDING IRONS. Brands shall be made by hot iron or freeze iron and shall be done in such manner to be clear and recognizable, and legible so as to enable ready identification. The major character or characters on the branding iron when applied to cattle shall be not less than three and one-half (3 1/2) inches in height, and/or three and one-half (3 1/2) inches in length, width or diameter. The major character or characters on the branding iron when applied to horses, mules and asses shall be not less than two (2) inches in height, and/or two (2) inches in length, width or diameter. Brands made in any other manner or size not permitted by this section shall be invalid and will not be recorded. All brands presently recorded at the effective date of this act shall be valid brands, but provided further that upon renewal of such brands, then and in that event such brands must comply with this chapter. Brands for sheep shall not be subject to the height, length, width or diameter limitations imposed by this section, but shall be of such height, length, width or diameter as prescribed by the state brand board, and brands for sheep shall not be subject to the hot iron or freeze iron limitations imposed by this section for cattle, horses, mules and asses.

History:

[(25-1141) I.C., sec. 25-1202A, as added by 1973, ch. 168, sec. 10, p. 339; am. 1988 & redesignated 25-1141, ch. 75, sec. 20, p. 121.]

LegalFix

Copyright ©2024 LegalFix. All rights reserved. LegalFix is not a law firm, is not licensed to practice law, and does not provide legal advice, services, or representation. The information on this website is an overview of the legal plans you can purchase—or that may be provided by your employer as an employee benefit or by your credit union or other membership group as a membership benefit.

LegalFix provides its members with easy access to affordable legal services through a network of independent law firms. LegalFix, its corporate entity, and its officers, directors, employees, agents, and contractors do not provide legal advice, services, or representation—directly or indirectly.

The articles and information on the site are not legal advice and should not be relied upon—they are for information purposes only. You should become a LegalFix member to get legal services from one of our network law firms.

You should not disclose confidential or potentially incriminating information to LegalFix—you should only communicate such information to your network law firm.

The benefits and legal services described in the LegalFix legal plans are not always available in all states or with all plans. See the legal plan Benefit Overview and the more comprehensive legal plan contract during checkout for coverage details in your state.

Use of this website, the purchase of legal plans, and access to the LegalFix networks of law firms are subject to the LegalFix Terms of Service and Privacy Policy.

We have updated our Terms of Service, Privacy Policy, and Disclosures. By continuing to browse this site, you agree to our Terms of Service, Privacy Policy, and Disclosures.
Section 25-1141 - REQUIREMENTS FOR BRANDING IRONS.