Diagnostic test kits that are not licensed by the Service (e.g., bacteriological culturing kits) may be approved through the following procedure:

The sensitivity of the kit will be evaluated in at least three NPIP authorized laboratories by testing known positive samples, as determined by the official NPIP procedures found in the NPIP Program Standards or through other procedures approved by the Administrator. Field samples, for which the presence or absence of the target organism or analyte has been determined by the current NPIP test, are the preferred samples and should be used when possible. Samples from a variety of field cases representing a range of low, medium, and high analyte concentrations should be used. In some cases it may be necessary to utilize samples from experimentally infected animals. Spiked samples (clinical sample matrix with a known amount of pure culture added) should only be used in the event that no other sample types are available. When the use of spiked samples may be necessary, prior approval from the NPIP Technical Committee is required. Pure cultures should never be used. Additionally, laboratories should be selected for their experience with testing for the target organism or analyte with the current NPIP approved test. (e.g., a Salmonella test should be evaluated by NPIP authorized laboratories that test for Salmonella routinely). If certain conditions or interfering substances are known to affect the performance of the kit, appropriate samples will be included so that the magnitude and significance of the effect(s) can be evaluated.

The specificity of the kit will be evaluated in at least three NPIP authorized laboratories by testing known negative samples, as determined by tests conducted in accordance with the NPIP Program Standards or other procedures approved by the Administrator in accordance with § 147.53(d)(1). If certain conditions or interfering substances are known to affect the performance of the kit, appropriate samples will be included so that the magnitude and significance of the effect(s) can be evaluated.

The kit will be provided to the cooperating laboratories in its final form and include the instructions for use. The cooperating laboratories must perform the assay exactly as stated in the supplied instructions. Each laboratory must test a panel of at least 25 known positive samples. In addition, each laboratory must test at least 50 known negative samples obtained from several sources, to provide a representative sampling of the general population. The cooperating laboratories must perform a current NPIP procedure or NPIP approved test on the samples alongside the test kit for comparison and must provide an outline of the method on the worksheet for diagnostic test evaluation. Reproducibility and robustness data should also be included.

Cooperating laboratories will submit to the kit manufacturer all compiled output data regarding the assay response. Each sample tested will be reported as positive or negative, and the official NPIP procedure used to classify the sample must be submitted in addition to the assay response value. A completed worksheet for diagnostic test evaluation is required to be submitted with the compiled output data and may be obtained by contacting the NPIP Senior Coordinator. Data and the completed worksheet for diagnostic test evaluation must be submitted to the NPIP Senior Coordinator 4 months prior to the next scheduled General Conference Committee meeting, which is when approval will be sought.

The findings of the cooperating laboratories will be evaluated by the NPIP Technical Committee, and the Technical Committee will make a majority recommendation whether to approve the test kit to the General Conference Committee at the next scheduled General Conference Committee meeting. If the Technical Committee recommends approval, the final approval will be granted in accordance with the procedures described in §§ 147.46, 147.47, and 147.48.

Diagnostic test kits that are not licensed by the Service (e.g., bacteriological culturing kits) and that have been approved for use in the NPIP in accordance with this section are listed in the NPIP Program Standards.

Approved tests modification and removal. (1) The specific data required for modifications of previously approved tests will be taken on a case-by-case basis by the technical committee.

If the Technical Committee determines that only additional field data is needed at the time of submission for a modification of a previously approved test, allow for a conditional approval for 60 days for data collection side-by-side with a current test. The submitting party must provide complete protocol and study design, including criteria for pass/fail to the Technical Committee. The Technical Committee must review the data prior to final approval. This would only apply to the specific situation where a modified test needs additional field data with poultry to be approved.

Approved diagnostic tests may be removed from the Plan by submission of a proposed change from a participant, Official State Agency, the Department, or other interested person or industry organization. The data in support of removing an approved test will be compiled and evaluated by the NPIP Technical Committee, and the Technical Committee will make a majority recommendation whether to remove the test kit to the General Conference Committee at the next scheduled General Conference Committee meeting. If the Technical Committee recommends removal, the final decision to remove the test will be granted in accordance with the procedures described in §§ 147.46, 147.47, and 147.48.