Determination of represented value. Manufacturers must determine represented values, which includes certified ratings, for each basic model of general service lamp in accordance with following sampling provisions.

The requirements of § 429.11 are applicable to general service lamps, and

For general service incandescent lamps, use § 429.27(a);

For compact fluorescent lamps, use § 429.35(a);

For integrated LED lamps, use § 429.56(a);

For other incandescent lamps, use § 429.27(a);

For other fluorescent lamps, use § 429.35(a); and

For OLED lamps and non-integrated LED lamps, use § 429.56(a).

Certification reports. (1) The requirements of § 429.12 are applicable to general service lamps;

Values reported in certification reports are represented values;

For general service incandescent lamps, use § 429.27(b);

For compact fluorescent lamps, use § 429.35(b);

For integrated LED lamps, use § 429.56(b); and

For other incandescent lamps, for other fluorescent lamps, for OLED lamps and non-integrated LED lamps, pursuant to § 429.12(b)(13), a certification report must include the following public product-specific information: The testing laboratory's ILAC accreditation body's identification number or other approved identification assigned by the ILAC accreditation body, initial lumen output, input power, lamp efficacy, and power factor. For non-integrated LED lamps, the certification report must also include the input voltage and current used for testing.

Rounding requirements. (1) Round input power to the nearest tenth of a watt.

Round initial lumen output to three significant digits.

Round lamp efficacy to the nearest tenth of a lumen per watt.

Round power factor to the nearest hundredths place.

Round standby mode power to the nearest tenth of a watt.